Signs It’s Time to Replace Your Windows

The most misunderstood sign: where the condensation actually is

Foggy windows get blamed for the wrong thing constantly, because the location of the moisture completely changes what it means. Not all window condensation is a sign of failure — some of it means your window is doing exactly what it's supposed to.

Only the first one is actually about the window. If you're seeing condensation on the inside of your home, the fix is addressing indoor humidity (the EPA recommends keeping it between 30% and 50%), not replacing windows. If it's on the outside in the early morning, that's just the window doing its job in a temperature differential — no action needed at all.

What between-pane condensation actually means

Modern double- and triple-pane windows are sealed units with an inert gas — usually argon or krypton — trapped between the panes to boost insulation. When that seal fails, the gas slowly escapes and outside air, carrying moisture, takes its place. That's the fog you're seeing, and it's trapped inside the glass itself, which is exactly why no amount of surface cleaning ever touches it. A window in this state has lost most of its insulating value, even though the glass itself still looks intact from a distance.

You'll find DIY "defogging" kits online that drill into the glass and remove the trapped moisture. These are cosmetic fixes only — they restore the view, not the window's actual thermal performance, since the insulating gas is already gone and won't be replaced. If a failed seal is the issue, a real fix means either a new glass unit or a full window replacement, not a defogging service.

Other signs to check

• A draft through a closed window — active energy loss happening every hour it goes unaddressed.
• Sticking, binding, or a lock that won't catch — both a comfort problem and, since it usually means the frame is out of square, a genuine security gap.
• Visible frame rot or warping — a warped or swollen frame doesn't seal correctly even when the sash appears fully closed.
• Distorted or bowed glass panes — air leaking through a failed seal can physically bend the glass over time.
• Mold or staining along the pane edges — a sign moisture has been sitting at the seal for a while.
• A spider web consistently rebuilding at one spot on the frame — a small but genuinely useful tell, since spiders tend to build near small drafts where insects get pulled in.

What's urgent vs. what you can plan for

Not every sign demands action this week. A few genuinely can't wait:

• Active frame rot — rot starting in a window frame can spread into the surrounding wall framing within just one to two seasons, turning a window repair into a structural one.
• A window that won't open or lock — beyond the security issue, any bedroom window that can't open fully to a large enough opening may not meet fire egress code, which is a genuine safety requirement, not a preference.

Everything else — a single failed seal, rising energy bills, general aging without active damage — is worth investigating and budgeting for, but can usually be scheduled rather than rushed.

Do you need a full replacement, or just new glass?

This is the question worth answering before you get quotes, since it changes your cost by a wide margin. As a general rule: a newer window with a sound, undamaged frame and an isolated seal failure is often a good candidate for a glass-only repair — swapping just the insulated glass unit while keeping the existing frame. An older window, one with multiple symptoms at once, or any visible frame rot or warping usually makes more sense as a full replacement, since a compromised frame will keep causing problems no matter how good the new glass is. Our window replacement cost estimator is built around exactly this choice — select "glass-only replacement" if your frame is sound, or "full window replacement" if it isn't, and get a real cost estimate either way.

What causes windows to fail in the first place?

• Age — seal materials break down gradually over the life of the window, and most seals aren't designed to last forever.
• Sun and weather exposure — UV rays and repeated temperature swings stress the seal every single day.
• Expansion and contraction — windows that heat up in direct sun and cool at night undergo constant micro-movement that fatigues the seal over years.
• Improper installation — a seal damaged during installation tends to fail earlier than it should.
• Foundation settling — if your home's foundation is actively settling or has shifted, it can put pressure directly on window frames and glass, which is worth ruling out if multiple windows are failing around the same time rather than one at a time. Our foundation repair cost calculator is worth a look if you're also seeing cracks, sticking doors, or sloping floors alongside window problems.

What does window replacement actually cost?

Full window replacement runs roughly $300 to $1,500+ per window depending on frame material, glass package, and whether the frame itself needs full replacement or just an insert. Glass-only repair is significantly cheaper — typically $150 to $650 per pane — when the frame doesn't need to be touched at all. Our window replacement cost estimator covers both scenarios and gives you an instant estimate based on your specific windows.

Frequently asked questions