French Drain Installation Cost Calculator

How much does a French drain cost in 2026?

French drain installation costs $10 to $100 per linear foot, with a national average project around $9,250. That's an unusually wide range even by home-improvement standards, and it's not random — it's genuinely three different jobs sharing one name. Two quotes for "a French drain" can land at $1,800 and $9,000 for reasons that are perfectly legitimate once you know what to ask: the type of drain, the excavation depth, and what happens to the water once it's collected. Use our calculator above to get an estimate specific to your actual project rather than the headline range.

French drain cost by type

A yard drain is a shallow trench that intercepts surface water before it pools. An exterior foundation (curtain) drain runs deeper, along or near the foundation, to intercept groundwater before it reaches the wall. An interior basement drain is a different project entirely — it's installed under an existing concrete floor around the basement's perimeter, requires cutting and removing concrete, and almost always connects to a sump pump to actually move the water back out. That last category is why the same phrase "French drain" can mean a $1,000 weekend fix or a $10,000+ basement waterproofing project.

Is DIY worth it?

Sometimes, but the numbers are closer than they look. Materials alone run $5 to $12 per linear foot, and renting a trencher can make a short, shallow yard run genuinely affordable to DIY. But one detailed cost breakdown found a real DIY project came out to $21.12 per linear foot once tool rental and materials were totaled — within the range professional installers charge for the same simple job, and without the benefit of a warranty or guaranteed correct slope. A French drain that's installed with the wrong pitch, clogged fabric, or a poorly routed outlet doesn't just fail to help — it can direct water toward your foundation instead of away from it, turning a DIY savings into a foundation repair bill. Short, shallow, open-yard runs are reasonable DIY candidates. Anything foundation-adjacent, deep, or connected to a basement is worth hiring out.

What actually makes a French drain last 20-30 years

The concept itself is over 150 years old and still works better than most modern alternatives when it's built correctly. The materials that matter most: washed gravel (not crushed stone with fines that will clog), proper filter fabric wrapped around the gravel to keep soil out of the pipe, correct slope along the entire run (even a small flat or reverse-sloped section defeats the whole system), and a reliable outlet that doesn't itself become blocked or overwhelmed. Skimping on any one of these is the most common reason a French drain fails years before it should.

Where does the water actually go?

This is one of the three variables that drives cost the most, and it's worth deciding early. Daylighting — simply routing the pipe to an open, lower point in the yard — is the cheapest option when the terrain allows it. A dry well is a gravel-filled pit that lets water absorb into the surrounding soil gradually, useful when there's no natural low point to drain to. A sump pump connection is standard for interior basement drains, since water collected below grade generally can't flow uphill and out on its own. Each option adds real cost, but choosing the wrong one for your site can mean redoing the project entirely.

What does a French drain protect against?

A French drain is one piece of a broader basement or foundation moisture strategy, not always the whole solution on its own. If you're dealing with an already-wet basement, our basement waterproofing cost calculator covers interior and exterior systems more broadly. If the concern is a sloped yard eroding near a retaining wall, our retaining wall cost calculator covers drainage as part of that structure specifically.

Frequently asked questions